GM TRANSMISSION TOOLS

Custom made tool to compress the low/reverse return spring on a thm 250 350 700 4l60e 4l65e 4l70e automatic transmission. Ends slide into case ridges, securing the tool, turn the shank to compress the spring down, then insert your snap ring pliers into the half moon cut edge remove snap ring, then release the screw shank to remove tension, unslide the tool, remove the tool, remove the snap ring and return spring blow air into the low reverse piston to remove the piston.

GM THM700-R4 (MD8) / 4L60 / 4L60E / 4L70E Turbine (Input) Shaft and Pump Stator Teflon Seal Ring Installer and Re-sizer Kit. "The Ring Buddy" fits Chevy Olds GMC 1987 and Above. and the tool to align, size, the bushing and the pump rotor on 700/4l60e

=THM700-R4 (MD8) / 4L60 / 4L60E/ 4L70E Pump Stator Teflon Seal Ring Installer and Re-sizer Tool. "The Ring Buddy" fits Chevy Olds GMC 1987 and Above.

This transmission teflon oil control ring tool kit (The Ring Buddy) easily installs and sizes Turbo Hydramatic THM700-R4 (MD8) / 4L60 / 4L60E / 4L70E turbine shaft teflon seals (input shaft oil control rings). The Ring Buddy was specially designed for those notoriously hard to install Teflon rings on GM TurboHydramatic 700-R4 family of transmissions. These Teflon oil control rings on the turbine shaft and pump stator shaft are supposed to be replaced on every repair. Failure of the seal rings will cause leaks and reduced apply pressure that will cause your clutches to slip and burn. Built of tough PVC plastic, the Ring Buddy is designed to prevent damage to your rings.

GM THM700-R4 (MD8) / 4L60 / 4L60E / 4L70E Turbine (Input) Shaft and Pump Stator Teflon Seal Ring Installer and Re-sizer Kit. "The Ring Buddy" fits Chevy Olds GMC 1987 and Above. and the low/reverse spring compressor tool T-0151 and a Transmission Pump Extractor Pump Puller Tool

GM THM700-R4 (MD8) / 4L60 / 4L60E / 4L70E Turbine (Input) Shaft and Pump Stator Teflon Seal Ring Installer and Re-sizer Kit. "The Ring Buddy" fits Chevy Olds GMC 1987 and Above. and the low/reverse spring compressor tool T-0151 and a Transmission Pump Extractor Pump Puller Tool and the tool to align, size, the bushing and the pump rotor on 700/4l60e

New Tool for 6L80/6L90 Front Seal Installer contents come with: -

(1) Installer - (1) Mandril - (1) new transmission front pump seal

​This transmission teflon oil control ring tool kit (The Ring Buddy) easily installs and sizes turbine shaft teflon seals (input shaft oil control rings). The Ring Buddy was specially designed for those notoriously hard to install Teflon rings on GM TurboHydramatic 6l80e/6l90e family of transmissions. These Teflon oil control rings on the turbine shaft are supposed to be replaced on every repair. Failure of the seal rings will cause leaks and reduced apply pressure that will cause your clutches to slip and burn. Built of tough PVC plastic, the Ring Buddy is designed to prevent damage to your rings.

NEW 4L60 automatic transmission pump bushing installer w/ one (1) Teflon pump bushing

Custom Made Tool 6l80 6l90 transmission bushing installer Tool with Handle Bushings are not included they are for illustration purposes only.

GM 4L80 pump gear alignment tool bushing sizer

GM THM700-R4 (MD8) / 4L60 / 4L60E / 4L70E Turbine (Input) Shaft and Pump Stator Teflon Seal Ring Installer and Re-sizer Kit. "The Ring Buddy" fits Chevy Olds GMC 1987 and Above. and the low/reverse spring compressor tool T-0151​

GM THM700-R4 (MD8) / 4L60 / 4L60E / 4L70E Turbine (Input) Shaft and Pump Stator Teflon Seal Ring Installer and Re-sizer Kit. "The Ring Buddy" fits Chevy Olds GMC 1987 and Above. and the low/reverse spring compressor tool T-0151​

​This tool easily removes/pulls Turbo Hydramatic THM350 and THM400 (M40) pumps. It also removes other pumps if the stator tube has a hump for it to grab. This particular tool was specially developed in-house and has gotten great review

New transmission holding fixture tool fits most transmission. Fits 6L80, 4L60e, 4L80e, e4od/4r100, and AOD/4fr70w with the use of a block